| Humidification Method: | Mist Discharge |
|---|---|
| Type: | Ultrasonic |
| Humidity Control: | Automatic |
| Power Type: | Vehicle Power Supply |
| Nozzle Tip: | 303ss |
| O-Ring: | Viton Gasket NBR |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
There are two types of spray
Small flow rate (2.4L/h) and larger flow rate 3.3L/h one ,
air pressure of 0.3MPa per one nozzle)
A humidifier can be installed (1-4) nozzles are one time,
4 nozzles of humidifier for 13.2L/h (air pressure is 0.3MPa). Automatic temperature control device and timing device control is simpler and more effective
Low pressure huge volume
Less air consumption
Easy-to-maintain mechanism
Size: 20*20*20cm
Product features:
Micro-fog: Droplet size is 3-15μ M, quick heat-absorption and very good cooling effect,
Energy-saving: Power consumption 2.2KKw /h @ 5000 square meters workshop, that's to say, you just pay 18RMB for that of 12 hours working. That's 1/10 cost of Traditional spray humidifier.
Reliable: High-pressure micro mist humidifier adopts industrial type imported piston pump, can be 24 hours long continued operation. Nozzle and water mist distribution unpowered damageable parts, can not be damaged in high dust environment.
Easy to maintenance: Install Soft water or pure water machine in water source, To avoid calcium, magnesium ions in water and other ions extracted and block nozzle. Meanwhile, and it can prevent pigment production, and protect production equipment and staff health.
Humidification capacity: A large quantity of humidification and free combination, Pumping station micro mist system for high voltage output flow from the 60kg/h~2880kg/h, can carry out stepless regulation, In the scope of any flow to configurate nozzle, and adjust humidification accuracy in any combination.
Wide application: The artificial landscape, dust, odor, nursery, greenhouse, livestock breeding, spraying, industrial cooling equipment and many other industrial fields.
1. Printing house, textile mill, and paper mill
2. Partial humidification and anti-static for machine side
3. Anti-static and dry fog cooling in plastics film factory
4. Humidification in all kinds of material
5. Humidifying in cold store for vegetables fruit and fresh food
6. Humidifier fog poultry farm
8. Automatic humidifying of time setting
9. Dry fogging humidifying
10. Humidifier of simple installation
How to use nozzle correctly:
Pls use clean compressed air and water, for prolong service life.
In order to ensure that the air and water clean, please use the standard auxiliary equipment and pipeline will not rust
Safety precautions:
Keep air pressure under 0. MPA(40 PSI), water pressure under 0. MPA (30PSI )
High pressure will cause the Joy-chain nozzle and pipe out
High pressure will cause the humidifier Water Leakage, can be used to reduce the water pressure reducing valve
Min-water pressure
According to nozzle Qty, pls set water pressure above pressure as below table, under 0.2 MPA
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}